Commercial Refrigeration: Three Repair Tips to Promote Freezer Room Efficiency
Commercial freezer rooms are built to provide uninterrupted service for a long period. However, these appliances are not everlasting or infallible. Over time, the performance of your commercial refrigerator will decline. The deterioration might be caused by natural wear. However, in most cases, the appliance wears due to poor maintenance, improper structure and even bad power supply. If the problems in your freezer are not repaired, the efficiency will reduce. In addition, the unit could fail completely. Here are simple tips for managing common causes of poor efficiency and premature failure.
Check the Power Supply
If your freezer is not performing as expected, you should first check the power supply. Power problems cause the deterioration and subsequent failure of appliances. This will lead to a lot of losses and inconveniences for your business. In addition, a faulty power supply presents significant danger. It is important to ensure that your outlets are providing enough power for the operation of your appliance. If the voltage is insufficient, you will notice problems like overheating and frequent short-circuiting. Also, confirm that the power cords are not frayed or otherwise damaged. If there are anomalies, replace the faulty elements or consult an electrician to upgrade your commercial electrical system.
Inspect the Freezer Door
A faulty freezer door is a significant source of inefficiency for commercial refrigeration. In simple terms, if the freezer room is not sealed due to openings in the door, cool air will leak out. This will lead to an increase in the internal room temperature. If the problem is ignored, the appliance will strain to maintain the temperature. Consequently, your electricity demand will be higher and the equipment will wear out a little faster. You should also note that highly sensitive goods may spoil after slight increases in freezer room temperature. If your door is damaged due to impact, consider managing dents and tears. In addition, replace the rubber gaskets designed to minimise heat exchange.
Check the Structure
It is essential to inspect the general structure of the freezer room if you cannot find the source of inefficiencies and other performance problems. In simple terms, the construction of the unit might be faulty, leading to inadequate insulation and security of the room. Look for gaps in the walls, moisture leaks and water damage. If there is only a small section of the freezer compromised, you might be able to repair the area. However, if the damage is generalised and spread, you might need to consult a specialised contractor for new freezer room construction.
To learn more, contact a refrigeration repair contractor.